Equipment Rebuild Technican

Learn More
Listed By

Voyant Beauty

RESPONSIBILITIES AND EXPECTATIONS • Provide daily liaison with gashouse leads, line mechanics, compounding manager and all gashouse operators to identify any needed rebuild support. • Direct, train, and evaluate all gas house personnel. • Support all gashouse changeovers. • Ensure adequate quantity of consumable spares are available for all rebuildable equipment. • Support gashouse Lead with troubleshooting on extended downtime issues in all gas houses. • Rebuild all available gas house components and in order to ensure spare assemblies are always available. • Rebuild mechanical assemblies for production maintenance as needed. This includes tape heads, case sealers, bundlers, compounding pumps, and various offline equipment. • Cover lunch breaks as needed. • Follow and enforce all Safety/GMP guidelines. • Perform all other duties as assigned. Shift 8:00 am - 4:00 pm

Production Direct (Plant) – Line Lead

Learn More
Listed By

Voyant Beauty

The Line Leader is the primary owner of production lines. All production operators must report and receive directions from the Line Leader. Production Line Leaders are fully responsible and expected to operate production lines using the provided resources to manufacture our customer’s products within the guidelines of safety, quality, efficiency, and inventory control. Essential Duties: • Monitor line cleanliness through the utilization of SIP audits and all other established programs • Perform Line Acceptance audit prior to beginning of each shift. • Maintain cleaning supply inventory for designated areas. • Must be able to safely operate all equipment on the line. • Perform propellant verification daily by ensuring correct propellant has been connected to the gasser and the Tank Farm Attendant and Line Mechanic have signed the white board. • Perform end of the line quality checks hourly at a minimum. Train and mentor operators performing additional required quality checks. • Read the work order daily to prior to beginning of each shift. Facilitate a meeting with all affected personnel and ensure they understand the areas that pertain to them and ensure they sign the work order verification form prior to start up. • Identify quality defects and initiate corrective action. • Monitor Packers' performance and ensure they understand the levels of defects and that they observe the Acceptable Quality Level. • Notify Supervisor of any problems that could place product in a "Hold" status required rework

Machine Operator II – 3rd Shift

Learn More
Listed By

Voyant Beauty

Machine Operator (VTC)- 3rd Shift (12AM-8AM) Operates and monitors continuous in-line process equipment to manufacture and package products that meet quality standards and customer requirements. Operators have the authorization to reject materials and finished goods that do not meet the established quality standards. Use of some judgment to comply with instructions and prescribed routines. The ability to meet quality standards, follow safety rules, follow company policies and procedures and the ability to work in a team environment. Essential Duties and Responsibilities: • Operate variety of machines to produce both aerosol and liquid products • Perform quality inspections of in process materials and finished goods. Rejects substandard quality • Manually manipulate components on production line to ensure proper filling and packaging • Complete written production records of shift activities and performance as required • Perform machine set-ups and changeovers for equipment. Must be able to perform these tasks within 90 days of placement • Perform re-work to eliminate waste of materials. Identify root cause for defects • Relieve team members for breaks and lunches • Perform basic maintenance on equipment such as minor adjustments • Maintain clean and safe work area • Perform other duties as assigned

Lead Packer – 3rd Shift

Learn More
Listed By

Voyant Beauty

Position Summary: Places finished goods into appropriate shipper. Performs quality checks on all items packed. Responsible for “Stop and fix” of bad quality at the end of the line. Responsibilities: • Pack finished product in the appropriate shipper. • Verify codes are correct and legible on all products packed. • Perform quality inspections of in process materials and finished goods. Rejects substandard quality. • Perform machine set-ups and changeovers for equipment. Must be able to perform these tasks within 90 days of placement. • Perform re-work to eliminate waste of materials. Identify root cause for defects. • Relieve team members for breaks and lunches. • Perform basic maintenance on equipment such as minor adjustments. • Maintain clean and safe work area. • Supervise and train other Packers. • Perform other duties as assigned.

Maintenance Line Tech – 2nd Shift

Learn More
Listed By

Voyant Beauty

Line Maintenance Mechanic - (4PM-12AM) Voyant Beauty is seeking to add an Industrial Mechanic to install, fix, and maintain machinery used in manufacturing processes. All processing is performed in Regulations, Standard Operating Procedures (SOP’s) and Health and Safety compliance with Good Manufacturing Practices (GMP), Quality Systems requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Primary responsibilities including but not limited to the following: • Must be able to follow both written and verbal work instructions. • Must be able to disassemble and reassemble small to medium size mechanical equipment such as pumps and mixers. • Perform preventive maintenance (PM) on manufacturing equipment following PM instructions. • Perform general maintenance in the manufacturing area. • Perform daily checks of various types of equipment to make sure they are OK for use, and report any equipment related issues / observations. • Must be able to enter PM data into the computer system. • Adhere to all safety rules and instructions and report any unsafe working condition.

Packer Lead – 2nd Shift

Learn More
Listed By

Voyant Beauty

Position Summary: Places finished goods into appropriate shipper. Performs quality checks on all items packed. Responsible for “Stop and fix” of bad quality at the end of the line. Problem solving includes performing correct machine set ups and changeovers, resolving quality issues by adjusting machines or contacting maintenance for repairs. Packers are the final inspectors on the line before the product is shipped. They have the authorization to reject materials and finished goods that do not meet the established quality standards.

Forklift Operator – Backup CDL Driver – 1st Shift

Learn More
Listed By

Voyant Beauty

The Hybrid Driver’s primary responsibility is to drive a forklift to carry out the daily warehouse functions. This includes but not limited to loading trucks, unloading trucks, pulling work orders, putting away raw and finished materials, forklift inspections, trailer inspections. The secondary role of the Hybrid driver’s responsibilities is to cover truck driving when main driver is out. This includes but not limited to shuttling trailers between our two locations at Voyant Beauty of Gainesville, Georgia. Driver must also do daily checks of the tractor and trailers in ensure everything is working properly and no defects. Report all issues to the Warehouse Lead, Supervisor, or Manager. This role is primarily a forklift driving position. Gainesville local route only.

EMRA (Engineering, Maintenance, Reliability & Automation) Manager

Learn More
Listed By

Voyant Beauty

Summary: The EMRA Manager (Engineering, Maintenance, Reliability, Automation) is responsible for strategic planning, execution and overall performance of the EMRA organization, budgets, and processes. This position also manages the day-to-day formation of a reliability centric application of methods and practices that preserves asset life and works towards achieving no function losses for achieving and exceeding Quality, Cost, Delivery, Safety targe

Plant Electrician

Learn More
Listed By

Voyant

First Shift Electrical Technician Duties & Responsibilities: •High level of knowledge and understanding around personal and processsafety •Layout, maintain and repair all electrical equipment and power and lighting systems in the plant including motors, generators, transformers, controls and mechanisms, timing devices, switches, cables, and conduits. •Troubleshoot, repair, and maintain plant production equipment. PLC, VFD, Servo Motor and Programmable Sensors. •Perform functional tests to determine electrically powered/controlled machines or equipment operate properly after installation or repair. •Work on "live" circuits as required. •Safely maintain plant electrical power distribution including transformers, switch gears, panels, and associated wiring •Strong understanding of area classifications, class, divisions, and zones •Compliance to all safety requirements is a must, such as LOTO and PPE equipment. •Operation of lift equipment as required. •Assist other skilled trades as required. •Other duties as assigned.

Machine Operator

Learn More
Listed By

Dewtex Inc.

MACHINE OPERATOR Job description Dewtex Inc., part of the James Dewhurst group and now part of SIOEN Industries, has grown into one of the largest global manufacturers of flexible reinforcement textiles. Our proprietary laid scrim processes, weaving technologies and lamination capabilities enable us to offer high-performance industrial laid and woven textiles. At Dewtex Inc. we manufacture a wide range of laid scrims, achieved through a manufacturing process, which was developed in house. We produce excellent quality products at high speeds and widths up to 204 inches. • Great Benefits include medical, dental, vision, short- and long-term disability, life insurance, and 401k with company match. • Quarterly Bonus Potential. Equal Opportunity Employer Drug-Free Workplace Salary: $17.71-$23.31 Benefits: • 401(k) • 401(k) matching • Dental insurance • Health insurance • Life insurance • Paid time off • Referral program • Vision insurance Schedule: • 12 hour shift Ability to commute/relocate: • Eastanollee, GA 30538: Reliably commute or planning to relocate before starting work (Required) Work Location: In person

Maintenance Multi-Craft Technician

Learn More
Listed By

JTEKT North America - DAH

MINIMUM JOB REQUIREMENTS: • High school diploma or GED and 5 years of experience in maintenance related activities • 2-year technical degree in related discipline will substitute for related work experience • Must successfully pass job-specific testing and mechanical aptitude test. • Qualified in general industrial electricity (440v, motors, low voltage controls) • Working knowledge of PLC • Read and draw prints and schematics • Must successfully pass Mechanical Comprehension test • Knowledge of basic maintenance tools such as wrenches, power tools, hand tools, arc, mig and tig welding and acetylene torch acquired through certified technical degree or 5 years comprehensive experience in maintenance of similar equipment at a manufacturing plant • Must be able to lift up to 40 pounds • Experience in welding/fabrication of heavy and light sheet metal • Basic knowledge of press, grinders, metal shear, break and roll • Must be able to interpret and respond to written and verbal instructions • Read and interpret prints, drawings, schematics, operating manuals, repair manuals, and parts lists • Must be able to work in height-related area over 15 feet • Must obtain and maintain Class II lift truck license • Must be able to work flexible hours, weekends and holidays TRAINING REQUIREMENTS: Generic: Dahlonega Plant Basic Training to include New Associate Orientation, 5S, Lean Manufacturing, and annual OSHA-required training. Job Specific: Up to six months training and experience required to become qualified in job duties to include:  Obtain and maintain class II lift truck license.  Electronic and mechanical training on plant equipment to include, but not limited to, centerless grinders, inspection machines, furnaces, cold forming machines, etc.  Vehicle safety awareness.  Confined Space Non Permit.  Lockout-Tag out Affected training. Pay progression is based on experience, demonstrated performance, extra certifications/courses, etc. REGULATORY REQUIREMENTS: Safety: Follow all SDS guidelines as they apply to the materials used to perform the job. Must wear proper PPE as required. Must use safe driving habits while operating company owned vehicles. Must use safe lifting/ material handling practices and techniques. Lockout-Tag out (LOTO): Adhere to OSHA and Corporate guidelines for lock out/tag out policy. Environmental: Adhere to company/plant policies/ regulations regarding safety and environmental issues. Compliance: Must adhere to the Compliance and Ethics Program Policy and the Whistleblowing Policy. SUPPLEMENTAL REQUIREMENTS: Communication: Must communicate effectively within the department, with internal customers, sister plants, and vendors. Housekeeping: Will be required to perform 5S/housekeeping assignments. Teamwork: Participate in team activities inside and outside of the work area. WORKING CONDITIONS: Somewhat disagreeable working conditions. Must occasionally lift up to 40 pounds. Responsible for electronic troubleshooting, diagnostics, and component repair and replacement. Expected to aid in keeping the plant up to date in the electronics field by identifying and implementing new applications, areas for improvement, improved equipment, and improved methods that result in lower cost and improved quality. Concentrated attention needed to avoid loss time injuries to self and others. MINIMUM JOB RESPONSIBILITIES: • Read and draw prints and schematics that can be converted by draftsmen into standard format • Modify existing prints and schematics as required to reflect changes • Repair components when feasible • Analyze and evaluate circuit boards for repair • Train other support personnel • Service plant equipment/machines, microprocessor-based controls, instrumentation, solid state controls, in addition to normal electrical duties • Responsible for PM’s and repairs of all plant equipment • Plan, layout, and perform installation, inspection, maintenance, troubleshoot, and repair of all plant equipment following the approved maintenance and installation standards • Work with other maintenance technicians when completing all phases of installation, PM, and/or repairs, specifically plumbing of air, hydraulic, oil, water and gas lines • Ability to use multi-meter to check live circuit • Make all necessary weldments and perform minor masonry work • Use measuring devices (precision equal to machinist) such as micrometers, gauges, calipers, and other measuring devices necessary to troubleshoot and repair equipment • Repair and maintain electric motors, hydraulic and pneumatic systems, electrical and mechanical control systems, lighting systems, and power transmission systems • Ability to safely rig machine parts for removal from equipment • Participate in training of other maintenance employees • Legibly and accurately complete all paperwork • Perform other duties as required by manager

Senior Customer Service Representative

Learn More
Listed By

Morito Scovill America

Morito Scovill Americas is a global provider of high-performance fasteners for apparel and light industrial applications, as well as attaching machine equipment and expert technical support. With a presence in over 25 countries, MSA offers a vast supply chain network to ensure operational efficiency and continuous improvement for customers and partners. Our headquarters is located in Clarkesville, Georgia, USA, where our team of technicians and designers work closely with customers to provide customized fastener and equipment solutions. This is a full-time on-site role for a Senior Customer Service Representative. The Senior CSR will be responsible for handling customer inquiries, providing support, ensuring customer satisfaction, and delivering exceptional customer service. The role involves maintaining customer relationships, resolving issues or complaints, and identifying opportunities for improvement in customer experience.